At Meta Mechanics, we pride ourselves on providing expert automotive services that ensure both the safety and performance of your vehicle. Recently, we had the pleasure of working on an Audi RSQ5, where we completed a thorough rear brake pad replacement. During the service, our skilled technicians identified several key issues that required attention. We’re committed to not only fixing the immediate concern but also offering solutions to prevent future complications.
Issues Identified:
- Excessive Brake Pad Wear
- Problem: The rear brake pads on the Audi RSQ5 had worn down significantly, much more than what would be considered normal for the vehicle’s mileage. This could lead to poor braking performance, increased stopping distance, and potential damage to the brake rotor.
- Solution: We replaced the worn-out brake pads with high-quality, OEM (Original Equipment Manufacturer) pads, ensuring optimum braking efficiency. It’s important to regularly check brake pads and replace them as they wear down to maintain top-tier performance.
- Uneven Pad Wear
- Problem: Upon inspection, we noticed that the wear was not uniform across both sides of the vehicle. Uneven wear can be caused by issues like misalignment, suspension problems, or even brake caliper sticking.
- Solution: To resolve this, we carried out a full brake system inspection, checking the alignment and the condition of the calipers. We cleaned and lubricated the calipers to ensure smooth operation and even pad wear. We also conducted a wheel alignment to ensure proper handling and wear distribution.
- Brake Fluid Contamination
- Problem: The brake fluid reservoir showed signs of contamination, which can lead to reduced braking efficiency and the potential for corrosion inside the brake system. Contaminated fluid may cause the brake pads to wear unevenly and may even result in brake system failure over time.
- Solution: We flushed the brake system and replaced the contaminated fluid with high-performance DOT fluid. Regular brake fluid maintenance is critical to ensure the hydraulic system functions properly and the vehicle stops safely.
- Warped Brake Rotors
- Problem: We also discovered that the brake rotors were slightly warped, likely due to overheating from aggressive driving or prolonged braking. Warped rotors can cause vibrations during braking, reduced stopping power, and uneven pad wear.
- Solution: We resurfaced the rotors to restore their smoothness and ensure even contact with the new brake pads. In cases of excessive warping, we recommend replacing the rotors entirely, but for this RSQ5, resurfacing was sufficient to return the braking system to its optimal state.
- Rust and Corrosion on Brake Components
- Problem: Some of the rear brake components, including the calipers and hardware, showed early signs of rust and corrosion. This could potentially affect the smooth operation of the braking system and may lead to brake failure in extreme cases.
- Solution: We thoroughly cleaned and treated the affected components, applying anti-corrosion solutions to ensure they stay in good condition for longer. In some cases, we may recommend replacing severely rusted components to ensure maximum safety.
Audi RSQ5 Inspection of Rear Brake Pads
Audi RSQ5 Removal of Rear Wheels
Audi RSQ5 Removal of Old Rear Brake Pads
Audi RSQ5 Inspection of Rear Brake Rotors for Damage or Wear
Audi RSQ5 Rotor Resurfacing or Replacement (if necessary)
Audi RSQ5 Cleaning of Brake Components (Calipers, Rotors, etc.)
Audi RSQ5 Lubrication of Caliper Slides and Hardware
Audi RSQ5 Installation of New Rear Brake Pads
Audi RSQ5 Brake Pad Bedding-In Process
Audi RSQ5 Reinstallation of Rear Wheels and Torque Check
